Cojali 50002002, User Manual

Page: 36 / 56

JT2002
Auto Range Multimeter
User Manual
36
⚠
Warning
To avoid possibility of electric shock, do not use Hold mode to determine if circuits
are without power. The Hold mode will not capture unstable or noisy readings.
The Hold mode is applicable to all measurement functions.
Press HOLD to enter Hold mode; the Meter beeps.
Press HOLD again to exit Hold mode; the Meter beeps.
In Hold mode, is displayed.
RANGE button.
Press RANGE to enter the manual ranging mode; the Meter beeps.
Press RANGE to step through the ranges available for the selected function;
the Meter beeps.
Press and hold RANGE for over 2 seconds to return to autoranging; the Meter
beeps.
MAX MIN button.
Press MAX MIN to start recording of maximum and minimum values. Steps
the display through high (MAX) and low (MIN) readings. The Meter enters
manual ranging mode after pressing MAX MIN button.
Press and hold MAX MIN for over 2 seconds to exit MAX MIN mode and return
to the present measurement range.
Operation of Hold Mode