Cojali 50002002, User Manual

Page: 35 / 56

JT2002
Auto Range Multimeter
User Manual
35
⚠
Warning
To avoid harm to yourself, do not input higher than DC 60V or AC 30V voltages.
To measure temperature, connect the Meter as follows:
1. Set the rotary switch to ºC ºF.
2. Insert the temperature probe into the input terminal as shown on the figure 9.
3. Place the temperature probe to the object being measured.
After a few seconds, the measured value will be shown on the display.
4. Press BLUE button to toggle between ºC and ºF temperature.
Note
To avoid measurement error especially low temperature measurement, the
operating temperature must not exceed 18 ~ 28 ºC.
When temperature measurement has been completed, disconnect the
connection between the temperature probe and the object being measured,
and remove the temperature probe away from the input terminals of the Meter.