Cohu Electronics
5930 Series Thermal Camera User's Manual
Cohu Electronics
P
AGE
8
OF
17
3912 Calle Fortunada
San Diego, CA 92123-1827
Phone: 858-277-6700
Fax: 858-277-0221
1.6
Mechanical Characteristics
The Camera dimensions are as shown in Figure 3. These dimensions show the Camera without
a lens or mating connector. The mating connector adds about 2.0" to the rear of the camera
which includes room for the cable's bend radius. The different focal length lenses are larger as
they go up in focal length. This will add to the length of the camera depending on the lens focal
length.
Figure 3 - Camera Dimensions
2.
Installation
This section describes everything from removing the camera from the box to how to connect the camera
to external devices.
2.1
Unpacking and Receiving Inspection.
The camera was tested and carefully packed at Cohu Electronics. Upon acceptance by the
carrier, they should assume responsibility for its safe arrival. Should you receive this item in
damaged condition, claims for shipping damage must be filed against the carrier.
To return the camera to the factory for any other service, please contact Cohu Electronics
Customer Service Department for a Return Authorization Number.
2.2
Lens Cleaning.
The lens provided with this Camera has the front lens element diamond carbon coated. Even
though this coating is very tough, the following cleaning procedures should be adhered to. A light
dusting of air should be enough to dislodge most dust particles, although small amounts of dust
should not affect camera performance. If necessary to clean the front surface, use 75% isopropyl
alcohol and a lens tissue. Use a clean section of tissue with each swipe so as to
not drag dirt back on the front lens surface.
