Cohu Electronics
5930 Series Thermal Camera User's Manual
Cohu Electronics
P
AGE
15
OF
17
3912 Calle Fortunada
San Diego, CA 92123-1827
Phone: 858-277-6700
Fax: 858-277-0221
Camera Software Feature
Host Application
Control (C) or
Monitor (M)
Notes
Static Configuration Data
C/M
Modification of factory static
configuration data reserved for
specific OEM
’
s.
Individual Operational Mode Configuration
C/M
Modification of factory operational
mode data reserved for specific
OEM
’
s.
Individual NUC Mode Configuration
C/M
Modification of factory NUC mode
data reserved for specific OEM
’
s.
Motorola DSP Register Settings
C/M
Modification of any DSP registers is
not suggested except for advanced
users. Changes may prevent
camera from operating properly.
Xilinx FPGA Register Settings
C/M
Modification of any FPGA registers
is not suggested except for
advanced users. Changes may
prevent camera from operating
properly.
Access to DSP Memory
C/M
Read/Write access reserved for
specific OEM
’
s.
Access to SPI FLASH Memory
C/M
Read/Write access reserved for
specific OEM
’
s.
Access to NUC FLASH Memory
C/M
Read/Write access reserved for
specific OEM
’
s.
Access to NVM RAM
C
Camera operational state is stored
in NVM via operational software.
Do not modify directly.
Access to Real Time Clock
C
Access to operational software configuration
variables/settings.
C
Contact Lumitron for specific
information.
4.
Environmental Specifications
4.1
Temperature
The storage temperature range is -40
º
C to 85
º
C.
The operating temperature range is -40
º
C to 60
º
C.
4.2
Water Resistance
The Camera as shipped from factory with Lens meets or exceeds the NEMA4 and IP67 water
resistance rating.
4.3
Relative Humidity
The Camera as shipped from factory with Lens meets a relative humidity of 10% to 95%, non-
condensing.
