COHU 5935-1000/T100 User Manual Download Page 16

 

Cohu Electronics 

 

 

 

 

 

 

 

5930 Series Thermal Camera User's Manual 
 

 

 

Cohu Electronics 

P

AGE

 16 

OF

 17 

3912 Calle Fortunada 

San Diego, CA 92123-1827 

Phone: 858-277-6700 

Fax: 858-277-0221 

 
 

4.4 

Shock and Vibration 

NEMA TS-2 Compliance; 

Vibration: 5-30 Hz with 0.5G applied in three perpendicular planes.  
Shock: 10G applied in three perpendicular planes 

 

 

 

 

COHU ELECTRONICS WARRANTY 

 

Cohu, Inc., Electronics Division warrants equipment manufactured to be free from defects of material 

and  workmanship.  Any  part  or  parts  will  be  repaired  or  replaced  when  proven  by  Cohu  examination  to 
have  been  defective  within  two  years  from  date  of  shipment  to  the  original  purchaser  for standard  CCD 
cameras and one  year from date of shipment to the original purchaser for intensified CCD cameras and 
all other Cohu manufactured products. 

Pressurized Housings: Pressurized camera products include a lifetime pressurization warranty. Cohu 

will  re-pressurize  at  no  charge  returned  environmental  cameras  not  exhibiting  evidence  of  physical 
damage due to misuse. All warranty repairs will be performed at the factory or as otherwise authorized by 
Cohu in writing. Transportation charges to Cohu shall be prepaid by purchaser. 

Extended IR Cameras: Cameras utilizing extended infrared (extended IR) sensors found to exceed 

acceptable white blemish specifications within one month of delivery shall be repaired without charge. 

This warranty does not extend to Cohu equipment subjected to misuse, accident, neglect, improper 

application,  or  repaired  or  altered  by  other  than  Cohu  or  those  authorized  by  Cohu  in  writing.  Cameras 
utilizing  extended  IR  sensors  are  not  warranted  for  use  in  areas  of  elevated  levels  of  cosmic  radiation. 
Television  image  pickup  tubes,  image  intensifiers,  lenses,  and  products  manufactured  by  companies 
other than Cohu are warranted by the original manufacturer. 

This warranty is in lieu of all other warranties, express, implied, or statutory, including warranties of 

fitness for a particular purpose and merchantability, and sets forth buyers sole remedy in connection with 
such warranties. Cohu, in no event, whether as a result of breach of contract or warranty, tort (including 
negligence) or otherwise, shall be liable for any penalties regardless of reason; collateral, consequential, 
incidental, or exemplary damages, including without limitation, any loss of profit or revenues, loss of use 
of any equipment or goods, or removal or re-installation of equipment without prior written approval. 

A  Return  Authorization  (RA)  Number  must  be  obtained  from  Cohu  prior  to  returning  any  item  for 

warranty repair or replacement. 
 

4/03 man.

 

Summary of Contents for 5935-1000/T100

















Reviews: