8
6X-1110B
2.0 Installation
This chapter covers the general installation and cable requirements of the ER8800 series.
NOTE: All graphics contained within this document, including screenshots and other displays, are for reference use
only and are subject to change.
Before starting installation:
•
Choose the installation mounting method. See Chapter 3 of this manual.
•
Have the system cable available. CohuHD-manufactured cables can be purchased with the cam-
era system. See Section 2.2.
•
Verify that the system cable can be routed to the location of the mounting assembly.
See Chapter 3 for details on the installation procedure for recommended mounts.
Figure 1 shows an interconnection diagram for the ER8800
series camera systems. The diagram repre-
sents typical installations. Each installation site will have its own unique requirements.
NOTE:
For a PC without a serial port, CohuHD recommends USB-RS232 adapter cable: p/n ES-U-1001-
R10(R100).
Power
Analog
Monitor
RS-232/422 Converter
Direct plug-in
to computer
serial port
422
232
Coax Cable
Serial Cable
System Cable
Earth
Ground
Properly secure the camera
system before the power is
applied.
Figure 1. Interconnection Diagram
