18
6X-1110B
•
A pole or a corner: Attach the wall mount to the studs on the large pole or large corner
mount and secure with the 5/16-inch nuts and washers (supplied). See Figures 5 and 6.
• A parapet: Position the wall mount over the flange holes. Secure with four 5/16-inch fas
-
teners (not supplied).
•
Install the support strut. For mounting on:
•
A wall or parapet: Prepare the surface for the support strut installation. Using the wall
swivel as a template, drill three holes into the mounting surface about 17 inches (430 mm)
from the centerline of the wall mount. See Figures 4 and 7.
•
A corner and pole: Attach the small corner mount to a wall or the small pole mount to a
pole and secure with fasteners (not supplied) or with the stainless steel mounting straps
(supplied). See Figures 5 and 6.
•
A wall, corner, pole, and parapet: Attach the wall swivel to the mounting surface with three
1/4-inch diameter stainless steel fasteners.
•
Attach the clamp swivel to the wall mount with the stainless steel clamp (supplied) and
securely tighten the clamp.
•
For a standalone camera system:
•
Loosen the bolts on the adjustable head and adjust the pan rotation and tilt angle to the
desired position. Retighten the bolts and lock the mount into place.
•
Connect the system cable to the camera system rear plate.
