Coherent Solutions SwitchBlade, User Manual

Page: 18 / 40

Modular Optical Switch | SwitchBlade
Coherent Solutions | SwitchBlade (V1.4) 14
9 Installing the Software
I
MPORTANT

Make sure the client PC is connected to the same network as the
MTP1000 and the MTP1000 is also powered on before proceeding with
software installation.

TIM version 2.2 or later is required to manage an MTP1000 with a
SwitchBlade module.
9.1 Client System Minimum Requirements

Operating System Windows 7 or later

Minimum Screen Resolution 800x600

Free Hard Disk Space 1GB

Communication Port USB 2.0 (Ethernet and USB 2.0 recommended)
9.2 Test Instrument Manager Software Installation
Begin the installation by running the ‘ CSTIMSetup.[version].exe ’’ file located on the supplied media. This will
start the installation of the Test Instrument Manager software package.
1. When the installation begins, you will see the Welcome screen. Click on Next to begin the installation.
2. Please read the license agreement. If you choose to accept the agreement, click on the “ I accept the terms
of the License Agreement ” check box and then click " Install ". If you do not wish to accept the terms of the
agreement, click on " Cancel " to terminate the software installation.
3. Once the license agreement has been accepted the installation will begin and the file progress will be
displayed throughout the installation.
4. When the installation has completed you can click on " Finish " with the check box ticked (by default) to
immediately start the Test Instrument Manager software.
5. The installer will also place a Test Instrument Manager application shortcut on your desktop.