Modular Optical Switch
|
SwitchBlade
Coherent Solutions
|
SwitchBlade
(V1.4)
12
Power down the MTP1000
3.
Press the
Power On/Off
switch. The
switch will no longer be illuminated
indicating that the instrument is off.
Figure 14 - Turn Off Power
W
ARNING
Take care when handling the SwitchBlade as during operation the
SwitchBlade module may be very hot.
Remove the SwitchBlade
4.
To remove the desired SwitchBlade module,
loosen the screw underneath the
release latch
.
Do not try to remove the screw completely as
they are designed to stay inside the
release
latch
.
Figure 15 - Unfasten screw under Release Latch
5.
Press downward on the
release latch
to unseat
the SwitchBlade module from the back
connector as shown in
Figure 16 - Press down on the Release Latch
6.
Slide the SwitchBlade module out to remove.
Figure 17 - Slide out the SwitchBlade Module
Summary of Contents for SwitchBlade
Page 1: ......
Page 40: ...V1 4...
