P R O G R A M M I N G
!RFID TXAFTER
Function This
command
controls the state of the hardware’s
RF carrier transmission after any Host Command
to read, write or write and lock an RFID-Tag
Explicit Form
!RFID TXAFTER ON/OFF
Parameters
ON
Causes hardware to keep RF carrier
transmission
ON
after CPL-RFID Tag-
Interface command completion.
OFF
Causes hardware to turn RF carrier
transmission
OFF
after CPL-RFID Tag-
Interface command completion
Response
No specific response
Command Type
RFID Setup/Debug Command
Example To
Printer:
!RFID TXAFTER OFF
!RFID ?
From Printer:
Setup/Config Parameters:
Assigned Tag Type: ISO15693
| | |
LED Flash Duration: 250 MSecs
SelecTag before Cmd: ON
TxPowerRF after Cmd: OFF
| | |
NOTE:
All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.
Copyright © 2004, Cognitive.
64