Cognex In-Sight 1400, Installation And Reference Manual

Page: 17 / 58

®
In-Sight
3
2 Installation
In This Section
2.1 Connecting the 1400 I/O Expansion Module ............................ 3
2.2 Configuring the Software .......................................................... 7
2.1 Connecting the 1400 I/O Expansion Module
This section explains how to connect the 1400 I/O Expansion Module using standard and
optional components. For a complete list of options and accessories, contact your Cognex
sales representative.
Table 2-1: Model 1400 I/O Expansion Module Connectors and Indicators
Connector/Indicator Description
COMM OK LED A yellow LED illuminates to indicate that the In-Sight sensor and
I/O module are communicating properly.
MODULE OK LED A yellow LED illuminates after the I/O module has powered on,
initialized and is ready to communicate with the In-Sight sensor.
I/O and Trigger Status LEDs A yellow LED illuminates to indicate that an input/output has switched
ON.
SENSOR Connector Connect an I/O module cable, which provides power, trigger and
I/O signals to the connected In-Sight sensor.
RS232 OUT Connector Connect a RS-232 serial cable, which provides the RS-232
communications between the I/O module and an external serial device.
Earth Ground Terminal Connect a common earth ground.
Terminal Blocks Connect 24VDC sensor power, trigger, external
I/O, high-speed outputs and common connections.