1. Select
Code Details
in Setup Tool.
2. Under the Basic tab, change the
Number of Codes
field to a value greater than 1 to see the expanded list of
options available.
3. Select the
Number of Codes
to be verified during a single trigger.
4. For
Should partial result be reported as a good-read?
select No.
5. Select the quantity of each symbology type to be verified in a single trigger.
6. Select the appropriate
Sorting Priority
.
7. Return to the TruCheck window and initiate a verification.
For multiple verifications, either a single region can be selected to identify all symbols to be verified or the entire
field of view can be used.
After a successful verification of multiple symbols, the arrows at the top of the TruCheck verification window allow the
individual results to be seen in each tab on the TruCheck window. If all verifications pass, the box is green. If any
verification fails, the box is red.
Any Code Quality reports saved include an appended report containing each individual result for the individual barcodes
verified.
21
Using Your DataMan 475 Verifier