40 DataMan 200 Quick Reference Guide
DataMan 200 Quick Reference Guide 41
If you need more information on the collection, reuse, and recycling systems, please contact your local or
regional waste administration.
You may also contact your supplier for more information on the environmental performance of this product.
i
Warnings and Notices
CAUTION: This device requires the use of a PoE Class 1 or 48V DC LPS power
supply.
NOTE: For product support, contact http://support.cognex.com
LASER LIGHT, DO NOT STARE INTO BEAM: CLASS 2 LASER PRODUCT
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE SERIOUS
INJURY
• Use of controls or adjustments or performance of procedures other
than those speciied herein may result in hazardous radiation
exposure.
• Do not attempt to service or repair this product -- return it to Cognex
for service.
• Do not permit anyone other than Cognex Corporation or Cognex-
authorized personnel to service, repair, or adjust this product.
• Do not attempt to open or modify this device except as described in
this document.
• Do not direct or relect laser light toward people or relective objects.
• Do not operate this device if it is damaged or if the covers or seals
are missing or damaged.
This Laser Product is designated as Class 2 during all procedures of
operation.
Wavelength
650 nm
Laser Power for classiication
< 1 mW
Beam Diameter
< 3mm at aperture
Divergence
< 1.5 mrad
For assistance contact Cognex Corporation at http://support.cognex.com
CAUTION: IP protection is ensured only when all connectors are attached to cables
or shielded by a sealing cap.
