About Checker™
•
Checker
is the sensor.
•
CheckMate™
is the software that runs on your PC. You use CheckMate to set up Checker.
Minimum PC Requirements
•
Microsoft® Windows® 2000 or Windows XP
•
400MHz Pentium® III CPU
•
128 MB RAM
•
USB version 1.1
•
1024 by 768 Display
Physical Description
Dimensions and Mounting
Getting Started
Install the CheckMate Software
1
Insert the CheckMate CD-ROM in your PC’s CD-ROM drive. The CheckMate install program
will start automatically. You must have Administrator rights on your PC to install CheckMate.
2
Follow the on-screen prompts to install CheckMate.
Install the Checker Sensor
1
Mount Checker using 3 M4x0.70 screws. The mounting should provide a suitable path to earth
ground.
2
Connect your 24 VDC power supply, as shown in the section
Connecting Checker
.
3
Connect Checker to your PC using supplied USB cable.
4
Connect input and output devices, as shown in the section
Connecting Checker
.
Checker comes with three sets of mounting screws of different lengths; choose the
correct length for your mounting.
Checker Status Indicator (Green LED)
On = Run mode
1 Blink/sec = Setup Mode
4 Blinks/sec = Internal Error
(Red LED)
Part Status Indicator
Focus Adjustment
Power and I/O
Cable
USB Connector
Focus Lock
M3 (1.5 mm hex)
53.2 mm
129.2 mm
45.9 mm
60.3 mm
3X mounting holes
M4x0.70 thread
0.32”deep
2.094”
1.806”
2.375”
5.087”
39.4 mm
1.550”
19.8 mm
0.778”
19.5 mm
0.772”
111.6 mm
4.383”
1
2
!
Summary of Contents for Checker 101
Page 1: ...Quick Reference...
