15
RECOMMENDED LUBRICATION SCHEDULE*
LIFTING MOTOR
FIGURE &
COMPONENT
TYPE OF LUBRICANT
TYPE OF SERVICE AND
REFERENCE NO.
(USE ONLY NEW LUBRICANT)
FREQUENCY OF LUBRICATION
HEAVY
NORMAL
INFREQUENT
Figure 19
Load Chain
SAE 90 gear oil
Daily
Weekly
Monthly
Ref. No. 8
Figure 18
Gearing
SAE 90 extreme pressure (EP) gear oil
At periodic inspection (See Figure 8A)
Figure 19
Ref. No. 18 & 30
Load Hook Bearing
SAE 30 gear or motor oil
Weekly
Monthly
Yearly
NLGI #2 multi-purpose
Figure 19
Idler Sheave Bearing
lithium base grease
At periodic inspection (See Figure 8A)
Ref. No. 27
(Bushing) Assembly
INSPECTOR’S REPORT
ITEM
REMARKS (LIST DEFICIENCIES AND RECOMMENDED ACTION)
Figure 8B — Recommended Inspector’s Report
NOTE: All bearings except hook and idler sheave bearings are prelubricated and sealed.
(*) This lubrication schedule is based on a lifting motor operating in normal environment conditions. Lifting motors operating in
adverse atmospheres containing excessive heat, corrosive fumes or vapors, abrasive dust, etc., should be lubricated more
frequently.
Figure 9 — Recommended Lubrication Schedule
Country Club Road
P.O. Box 779
Wadesboro, NC 28170 USA
TEL: (800) 477-5003
FAX: (800) 374-6853
Inspector’s
Date
Signature
Inspected
Approved by
Date
For more information contact: Sievert Crane and Hoist, (708) 771-1600, [email protected], www.sievertcrane.com
