background image

19

.

14.    Contemplated  use and warnings.

TOWER  marin

Contemplated  use and warnings

Tower is an appliance for delivering hot water and preparation of coffee.
Its long lasting, non-toxic components are easily accessible for proper cleaning and maintenance.

The user must be an adult.
The appliance must not be used by children or unsuitable people.
The user must comply with the safety regulations in force in the country of installation, 

as

well as with the rules dictated by common sense, and ensure that routine maintenance is carried
out regularly and correctly. The installer, the user and the maintenance technician must inform the
manufacturer of possible faults or wear which could af fect the system´s original safety.
The installer must check that the environmental conditions are suitable, so as to guarantee safety
and hygiene for the operators and users. The various manufacturers are responsible for the
commercial components fitted to the applince; the customer is responsible for the people
authorized to use the machine. (Do not expose the machine to the weather (sun, rain, etc. ).
Long appliance stoppages at temperatures as below 0ºC (zero degrees celsius) can cause
damage or breakage to the water tank ; thus total emptying is recommended.

”If the Power cord is damaged

, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard” (see servicemanual.)

All electrical installations must be done by a qualified electrician and within safety regulations that
applies for each country where the appliance are installed.

The manual 

is dedicated the user and/or an authorized personel. It will give you information how to

use the appliance in a correctly way, desirable maintenance and a good safety and security for the
user. The manufacturer is not responsible for personnel damage or environment damage, caused
by the appliance, if it has been used in a way, which is different from what prescribes in these
instructions.

This manual must always be available to the user and/or maintenance technician, 

who must

be informed of the correct use of the appliance and of possible hidden risks. It must be kept in
a dry, clean place.

The information given in this manual does not replace 

the safety instructions and technical

data for installation and operating directly affixed to the machine and packaging.
This manual is to be considered as part of the appliance and must be kept for future reference until
same is dismantled.

Should you lose it or require further information

, contact your area agent or the manufacturer .

This manual reflects the state of the art at the current time and cannot be considered inadequate
merely because it is updated later on the basis of new developments.
The manufacturer also reserves the right to modify the manual without the duty of updating earlier
issues, except in exceptional basis of new developments.

If the appliance is used incorrectly or in ways, other than described in this manual,

it will render any guarantee or manufacturer´s responsibility condition null and void; it should
only be used by a responsible adult.

Summary of Contents for TOWER MARIN




























Reviews: