4
Filling up concentrate
Filling up concentrate
1. Open door.
2. Turn up chute. (from steam trap).
3. Lift out canister.
4. Fill concentrate (mash).
5. Turn down chute and make sure that chute from the canister will be in close contact
with steam trap.
6. Start a flushing of machine, once.
•••••
Always use one way cleaning towelling when cleaning machine.
•••••
Important! Wash and disinfect hands before reassembling all parts into the mash
machine.
A
B
C
Wash these parts and assemble the machine.
Daily cleaning:
1.
Open door and loose
A-
Steam trap
B-
Mixer bowl
C-
Whipper chamber
D-
Whipper
E-
Assembly plate
-
Canister
-
Chute
F-
O-ring assembly plate
G-
Grommet whipper pin
-
Drip tray
2. Dish all these parts. Spray after that with a disinfectant.
Wait approximately 2 minutes.
After that, flush all parts with water to make sure that
rests of disinfectant disappears.
3. Wash and disinfect hands before parts will be
assembled again.
4. Dry and assemble all cleaned parts.
5. When reassemble whipper, it is important that whipper
will fit in with motor whipper pin (1), or else the whipper
will be defective.
E
F
D
G
(1)
