3
Installation and start
FastMash Basic
Adjusting of portion quantity
1. Open door.
2. Adjust time for full portion.
Clockwise = larger (bigger)portion,
Anticlockwise = smaller portion.
Adjusting of consistency – Shall be done of a service technician!
1. Open door.
2. Lift out canister. (for concentrate)
3. Adjust water tap (inside panel) with a screwdriver.
Clockwise = hard consistence,
Anti-clockwise = make thinner consistency.
IMPORTANT!
Do not make any alterations to the machine. Such measures may cause personal injury
and the machine to fail. The machine should stand on a flat surface so that it will function
properly.
The machine should be placed on a waterproof surface so that any leakage is easily
noticeable.
Make sure there is no bend on the connection tube when the machine is pushed into its
place. The tube connections should be regularly checked. Make sure that no leakage has
occurred in connection with installation. Do not leave the machine unattended while
using. Close water connection and electricity during the night when the machine is not
used.
The machine must be disconnected from electrical supply before any maintenance.
Capacity approx. 25 litre/water/hour
If you have any problems or questions please contact your local supplier.
