Operation
TO DISPLAY TEMPERATURE IN THE CELL
To display the temperature in the cell, press either the up or
down arrow on the SELECT button (A) to index forward or
backward through the grain (function) menu until the word
TEMPERATURE is displayed.
When TEMPERATURE is displayed, press TEST
button (B). The current temperature in cell will be
displayed in both F˚ and C˚. Temperature will be
displayed for a few seconds then will return to the
main grain menu.
NOTE: If the tester and grain are different
temperatures, the mass of the metal
tester will quickly warm or cool the grain.
Therefore, the temperature reading is the cell temperature, not
necessarily the temperature of the grain before being put in the cell.
TO AVERAGE TEST RESULTS
1. When testing grain, the test result is dis-
played for about ten seconds. During the
period that the test moisture % and tempera-
ture is displayed, press the MEMORY button
(A). The tester will acknowledge that it has
entered the reading into memory, by display-
ing the current average and then the number
of stored readings. Up to 20 readings can be
stored into memory. If the maximum number
of readings has been reached, the tester will
not allow any more readings to be stored.
NOTE: Averaging is stored for one grain only. When
a test for a new grain is performed, existing averag-
ing data for the previous grain is erased when the
new grain’s averaging data is taken. Averaging data is
retained even if batteries are removed.
2. Press the AVG button (B) to display the average of all
A
A
results entered for the grain being tested.
3. To clear the averaging, press the AVG button. The current average will be dis
T
T
-
played. Then press the CLEAR button (C) and the tester will then display 0.0%
( 0 ). This indicates that the averaging has been cleared.
7
