Operation
11
TO CLEAR CALIBRATION
1. Select grain to clear.
2. Press CAL button (A), tester will then
display last calibration that was made.
3. Press CLEAR button (B).
4. Tester will then display 0.0% for
T
T
both lines if the calibration has been
cleared.
NOTE: If you press the CAL button
––––– and tester displays 0.0% on
––––– both lines, then no calibration
––––– has been made for this grain.
TO SELECT A DIFFERENT LANGUAGE
1. At start up, the tester will always display the name of the last grain tested in the
current language selected. (English is the default language from the factory.)
2. To select a new language, press either the up or down arrow on the SELECT
T
T
button (A) to index forward or backward
through the grain (function) menu until the
word LANGUAGE is displayed.
3. When LANGUAGE is displayed, press TEST
button (B). The current language selected
will be displayed. Press either the up or
down arrow on the SELECT button (A) to
index forward or backward through the
grain language menu until your choice
of language is displayed. The seven (7)
languages (as displayed) are: ENGLISH,
SPANISH, GERMAN, FRENCH, ITALIAN,
SWEISH and PORTUGUESE.
4. Press TEST button (B) again to return to the main grain menu, which wil now be
displayed in the new language.
