22
LED alignment:
This item allows to align the minimum and
the maximum level of intensity of the LEDs:
• Minimum:
raise or lowers the minimum
intensity to level the dimming between
the fixtures;
• Maximum:
aligns the maximum output
level between each fixture;
• Exit:
exits the menu and stores the
changes;
Reset hours:
Allows to erase the hours of operation of the
LED module in case of replacement;
ALIG
[LED Alignment]
SURE
[Are you sure?]
R.HRS
[Reset LED Hours]
MIN
[Minimum]
MAX
[Maximum]
EXIT
[Exit]
EXIT
[Exit]
Warning!!
This chapter should be considered for the exclusive use of technicians and qualified personnel.
9.6
Electronic alignment of the leds
The display panel of
Risalto Led S
allows the electronic alignment of the LEDs, this procedure is
performed by
Coemar
at the time of testing, this procedure may be useful for special effects or in case
of replacement of internal components (PCBs, LEDs, etc...).
Altering the settings made by
Coemar
may radically alter the operation of the projector’s functions.
Carefully read the following prior to attempting any changes.
Warning!!
This menu can only accessed in the
DF.SE.
[Default Settings] menu by pressing at the same time
ENTER
and
MENU
buttons. This menu shall be accessed only by authorized technicians.
