English
10
4.2 Mechanical installation
Reflection LEDko P
may be hung from an appropriate structure in any position or on tripode.
If hanging the fixture from a lighting truss or similar, we recommend the use of an appropriate clamp “A”, as shown in the following
diagram.
WARNING!
Always ensure that your support structure and fixing (bolts, clamps, etc…)
are rated to support the weight of the fixture.
4.3 Safety chain
When hanging
Reflection LEDko P
it is recommended to use a safety chain, as required by current legislation. The safety chain
must pass through the handles of the unit and then attached to the structure.
If using steel cables and chains not Coemar's production, make sure they are suitable to support the weight of the unit according to
normative UL/ETL ( required: the weight of 6 complete devices for at least one hour)
4.4 Adjusting unit’s tilt
In order to adjust the tilt of the unit simply loose the side handle adjust the tilt and lock the yoke by tightening the handle again.
A
