English
19
9. Error messages
If a malfunction occurs,
Reflection LEDko P
has a self-diagnostic system that will show the error message on the display. The
following table will explain in detail the most common errors. If, despite of suggested intervention, the problem persists, call the
Coemar Service center near you.
Error message
Description and suggested solution.
DTER
DATA error
The initial configuration data has failed, the projector has uploaded the default configuration: turn on the
projector again and if the error persists, contact your Coemar service to control or replacement EEPROM
ADER
DMX Address Error
The projector does not receive all channels of DMX needs to function properly. Check the DMX address
indicated on the display and the number of channels generated by the mixer control. We recall in this
connection that some controllers do not generate all the 512 channels.
10.Accessories and spare parts
Reflection LEDko P
is a very versatile fixture, optional accessories for its customization are available under request:
Coemar order code
Description
AFO9305
Flight case nr. 3
LEDko P
+ nr. 3
Opticals
AFO9306
Flight case nr. 6
LEDko P
BC10011A006
Magnetic holder gobo
BC10011A001
Soft Profile PC
BC10011A002
Soft Profile FRESNEL
BC10011A009
Profile Zoom 28°/40°
ACO4201
4 leafs barndoor
All the components of
Reflection LEDko P
are available as spare parts from your Coemar dealer or Service. Accurate description
of the fixture, model number and type will assist us in providing for your requirements in an efficient and effective manner
