English
After having followed the preceding steps, turn on the DMX 512 controller which will be used to control the
ProSpot LX
;
following this, turn on the power to the unit and turn on the unit’s
power
switch. The projector will perform a reset func-
tion on all the internal and external motors. This will last some few seconds, after which it will be subject to the external
signal from the controller.
DMX reception
The display will be static on to indicate that DMX 512 signal is being correctly received.
If the display flashes, the projector is not receiving signal. Check your cabling and the controller for correct functioning.
Software versions
Two software systems operate within the projector, one in the display system
“
D
”
and one in the master system
“
M
”
. Upon
startup, the projector’s multifunction display panel will momentarily show readout of the software versions installed in your
projector.
For example, in the
ProSpot LX
you may see:
D 3.30
(display software
“
D
”
version 3.30).
M1.22
(master software
“
M
”
version 1.22.)
A00 I
function display
menu enter
+
9. Powering up
