By utilising the
Sensor Test PCB
, the
DR1
is able to test all the magnetic sensors, as well as light output, temperature and movement.sen-
sors of compatible coemar projectors.
Using the kit and cables provided in the packaging you will be able to quickly monitor the various sensors located in your projector for faults
and operation
If the
DR1
.
sensor test PCB
is not included with your
DR1
, it may be purchased via the
coemar
sales network as part number PCO9704
14.1 Connecting the Sensor Test PCB
To test the sensors, connect the
Sensor Test PCB
to the
DR1
via the 20 pin socket located at the rear of the
DR1
14.2 Sensor Testing
The
Sensor Test PCB
is equipped with three connectors labeled
con 1
,
con 2
and
con 3
, designed for various types of sen-
sors : magnetic (
con 1
), light and temperature (
con 2
) and movement (
con 3
).
To test the sensors you will need be in possession of a circuit diagram fro the compatible projector and a good understanding of the
projector’s operation.
Sensor Test PCB
is designed to allow technical personnel the ability to test the various sensors, connectors and cabling in order
to quickly determine the origin of a malfunction in a compatible projector.
The array of cables and sensors included in the kit will help you to familiarise yourself with the proper functioning of the projector
by connecting various components to the internals of the projector and obtaining the required diagnostic information.
presa a 20 pin per PCB sensor test
PCB sensor test 20 pin port
to external “PCB sensor test”
serial number
14. Utilising the Sensor Test PCB
30
English
Summary of Contents for DR1
Page 2: ...2 ...
