9.3.8. Protection against over-heating
You may select the type of action which
DIGIfactor
club
6x2,5Kw
will effect in case it begins to overheat.
off
: no protection
Pr 1
: if the internal temperature exceeds 75 °C any channels previously set as dimming will lower their maximum output by
up to 50% upon reaching 85 °C.
Any channels set as switching will be unaffected.
Pr 2
: if the internal temperature exceeds 75 °C any channels previously set as dimming will lower their maximum output by
up to 50% upon reaching 85 °C.
Any channels set as switching will be disabled.
or
9.3.9. Resetting DIGIfactor
club
6x2,5Kw
Allows the
DIGIfactor
club
6x2,5Kw
to reset all functions previously altered.
The display flashes to indicate an unconfirmed reset.
To escape at this point, without performing a reset,
press the
menu
button
function display
Press the
enter
button
A
reset
of all altered functions,
DIGIfactor
club
6x2,5Kw
resets to the
coemar
factory presets
Press the
+
or
-
button until
rESE
is displayed
To confirm your selection
Press the
enter
button
Function menu displayed
function display
Simultaneously press the
menu
and
enter
but-
tons
DIGIfactor
club
6x2,5Kw
turns on
Power up
DIGIfactor
club
6x2,5Kw
To confirm your selection
Press the
enter
button
Protection disabled
function display
Press the
+
or
-
buttons until
OFF
is displayed
To confirm your selection
Press the
enter
button
For example,
Pr 2
function display
Press the
+
or
-
buttons until the type of protection
desired is displayed
Protection menu
function display
Press the
+
or
-
buttons until
Prot
is displayed
Function menu displayed
function display
Simultaneously press the
menu
and
enter
but-
tons
DMX
address
Power up
DIGIfactor
club
6x2,5Kw