Coemar Concept Design 384, Manual, Page: 4 / 27

4
Congratulations on having purchased a Coemar product. You have assured yourself of a fixture of the highest
quality, both in componentry and in the technology used. We renew our invitation to you to complete the service
information on the previous page, to expedite any request for service information or spares (in case of problems
encountered either during, or subsequent to, installation). This information will assist in providing prompt and ac-
curate advice from your
Coemar
service centre. Following the instructions and procedures outlined in this manual
will ensure the maximum efficiency of this product for years to come.
1.
Packaging and transportation
1.1
Packaging
Open the packaging and make sure that no part of the equipment has suffered any damage during the transpor-
tation. In case of damage to the fixture, contact your currier and your supplier immediately by telephone, fax or
e-mail, and inform them you will formally notify them in writing through registered letter.
Packing list
Ensure the packaging contains:
1 Concept Design 384
1 Instruction manual
1 Main power plugs
2
.
General information
2.1
Safety informations
Fire prevention:
1.
Never locate the fixture on any flammable surface.
2. Minimum distance from flammable materials: 0,5 m.
3. Minimum distance from the closet illuminable surface: 0,5 m.
4.
Replace any blown or damaged fuse only with those of identical values. Refer to the sche-
matic diagram if there is any doubt.
5.
Connect the projector to mains power protected by a thermal magnetic circuit breaker.
Prevention from electric shock:
1.
Presence of high voltage inside of the fixture. Insulate the projector from mains supply
before opening or performing any function which involves touching the inside of the fix-
ture, including lamp replacement.
2. For the connection to the mains, adhere strictly to the guidelines outlined in this manual.
1.2
Transportation
The Concept Design 384 should be transported in either its original packaging.