Coemar Concept Design 384, Manual, Page: 24 / 27

24
Question Possible solution
Concept Design 384 does not
turn on
Check if the main power cable is in good condition and correctly
connected, check if the fuse on the switching power supply is blown.
Concept Design 384 does not
respond to DMX signal
Incoming DMX signal may not being received by the unit. check that
the address on display does not blink, check that controller and cables
are in good conditions, check for DMX addressing: Concept Design
384
may be incorrectly addressed.
The following list shows common issues that may be simply solved. If issues persist, the unit must be repaired by
qualified personnel or just contact your
Coemar
service near you.
11
.
F.A.Q. and answers