8
mounting
CF 7 W
ash
Z
oom
X
may be either floor or ceiling mounted.
For floor mounted installations
CF 7 W
ash
Z
oom
X
is provided with four rubber mounting feet. These feet may be remo-
ved if required for permanent installations or suchlike.
For ceiling mounted installations remove the rubber feet and use appropriate clamps or fixings to attach the fixture to the
mounting surface.
The structure from which the unit is hung should be of sufficient rating to hold the weight of the unit, as should any clamps
used to hang the unit.
The structure should also be sufficiently rigid so as not to move or shake whilst the
CF 7 W
ash
Z
oom
X
moves during ope-
ration.
protection against liquids
The projector contains electric and electronic components that must not come into contact with water, oil, or any other
liquid.
movement
The projector has a movement of 630° in the base and 260° in the yoke;
DO NOT
place any obstructions in the path of the
projector’s movement.
safety chain
The use of a safety chain (cod. 069) - fixed to the
CF 7 W
ash
Z
oom
X
and to the primary suspension point, is highly
recommended to protect against accidental failure, however unlikely, of the primary suspension point.
If using an after-market safety chain not manufactured by
coemar
, ensure that it is of sufficient rating to hold the weight of
the fixture.
risk of fire
Each fixture produces heat and must be installed in a well-ventilated position. The minimum recommended distance from
flammable material is: 0.5m. Minimum distance from the object being illuminated is: 2 m.
Warning
WARNING!,
DANGER!
The light beam is concentrated few centimeters from the fixture’s last lens, and it generates in that spot heat for more than
200°c.
Because of this, every object placed to close to the lens may catch on fire.
NEVER
install any object at less than 2 meters from the last lens, in order to prevent the risk of fire.
490mm
n
°
2 fori/holes
ø 14mm
6. Installation
English
