6
Replace the top plate into the bottom carriage directly above the lightning connector, similar
to the removal process; the top plate will be inserted approximately 5 millimeters from the
edge of the bottom carriage. Push down on the top plate to secure the iPhone onto the
lightning connector and seal the case.
Do NOT try to slide it down from the top.
Your CR7018 case will come with two screws and a 1.3 mm hex key. For larger
deployments, it is recommended to procure a specialized tool for quick assembly.
Insert the screws to secure phone and case.
The following URLs will direct you to
recommended tools for installing the provided
screws.
•
Ultra-Grip Screwdriver
o
https://www.mcmaster.com/7400A27
•
8 Piece Hex Screwdriver Set
o
https://www.mcmaster.com/57585A61
