6
D026227_08 CR822x Single Board Decoded Scan Engine Integration Guide
2.4 – Imager without Mounting Tab Mechanical Specifications
1. The Imager without mounting tabs has
four blind holes (two on top and two on
bottom) available for mounting with self-
tapping screws.
2. Please use #1-32 Trilobular
®
thread
forming screw or M1.8 Delta PT
®
thread forming screw, with the following
dimensions:
Minimum
Maximum
Thread Engagement
2.00 mm [.079”]
2.50 mm [.098”]
Length (B)
Mounting Substrate
Thickness (A) + 2.00 mm
Mounting Substrate
Thickness (A) + 2.50 mm
Torque
N/A
1.5 Ibf-in
[.807]
20.50
FRONT VIEW
[.536]
13.63
*
SIDE VIEW
[.138]
3.50
[.512]
13.00
A
Ø1.65 [.065] 3.00 [.118]
4 BLIND HOLES PROVIDED
FOR MOUNTING WITH
SELF-TAPPING SCREWS
TOP VIEW
[.469]
11.90
PIN 1
MOLEX CONNECTOR
P/N: 51338-0374
BACK VIEW
UNITS = MM [INCHES]
*Dimension will change based on focus.
Decrease for far focus; increase for near focus.
2.50 MAX
2.00 MIN
(3.00)
A
B
(Ø1.65)
(Ø2.00)
#1-32 OR
M1.8 SCREW
MOUNTING
SUBSTRATE
C8200
HOUSING
*Dimension will channge based on focus.
Decrease for far focus; increase for near focus.
UNITS = MM[INCHES]
