Code Code Reader 3600 User Manual Download Page 21

Page: 21 / 24

D013597_02_CR3600_User_Manual

26.0 - Reader ID and Firmware Version

Reader ID and Firmware

iVVVVWWWWXXXXSSSSSSSSSSAOODYYYYHHIIIIJJJJKKKKLLLL<TAB>Z…Z

To find out the Reader ID and firmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read the
following code:

You will see a text string indicating your firmware version and CR3600 ID number (see below):

i indicates ‘I’ string output;

VVVV is the application firmware version number;

WWWW is the core application firmware version number;

XXXX is reserved for the radio firmware version number;

SSSSSSSSSS is the Reader’s serial number (ten digits);

A is the current execution state:

OO is the OEM identifier;

D is the display type:

YYYY is the flash file system version number. Reserved;

HH is the hardware revision;

IIII is the hardware type identifier: 0010 indicates a CR3600

JJJJ is the boot application version;

KKKK is the operating system kernel version;

LLLL is the root file-system version;

<TAB> is the ASCII TAB character;

Z…Z is the decoder version: a null terminated string of printable ASCII characters. Without a decoder.ini file, the order of the

decoders listed here indicates the order of use.

Example:

Xap/i3000300006040010002363A06D-CD+SQ

Note:

Code will periodically release new firmware for CR3600 readers. For information on latest firmware versions, call Code

at (801) 495-2200. To upgrade firmware, please visit our website at

http://www.codecorp.com/codesupport.php

and follow

instructions provided.

“A” means core is running

“0” or “N” is no display device
“D” is the standard Keypad/Display

Summary of Contents for Code Reader 3600

























Search results

Summary of Contents for Code Reader 3600

Reviews:

Related manuals for Code Reader 3600

Brands by name

Popular brands

Code Code Reader 3600, User Manual

Search results

Summary of Contents for Code Reader 3600

Reviews:

Related manuals for Code Reader 3600

Brands by name

Popular brands