Code Blue IP1500 User Manual Download Page 7

Page: 7 / 40

Code Blue

•

259 Hedcor Street

•

Holland, MI 49423 USA

•

800.205.7186

•

www.codeblue.com

GU-137-B

page 7 of 40

IP1500/2500

User Guide

Logging Into The System

Place the IP Address of your IP1500/2500 into the URL address bar and press

ENTER.

B. Depending on the browser being used, a certificate warning may pop up. Go ahead

and approve in order to load up the login dialog box.

Enter user name “admin” and password “admin” and press ENTER.

System Status Screen.

Current session time before Auto-Logout is executed.

B. Clicking

Renew

will restart the timer to 10 minutes, effectively keeping you logged

in. This state helps prevent others from logging in and taking over the session,

therefore

erasing any unsaved changes made.

Clicking

Logout

will log you out of the GUI.

Network: Displays current IP address, DNS address, DNS Tertiary address, Account

1’s current status and Account 2’s current status.

Summary of Contents for IP1500









































Search results

Summary of Contents for IP1500

Reviews:

Related manuals for IP1500

Brands by name

Popular brands

Code Blue IP1500, User Manual

Search results

Summary of Contents for IP1500

Reviews:

Related manuals for IP1500

Brands by name

Popular brands