Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-137-B
page 13 of 40
IP1500/2500
User Guide
Configuring an IAX Account
Either of the IP1500/2500 speakerphone’s two accounts can be configured to register to a VoIP
system via IAX. (Note, however, that only one of the two accounts may be configured as IAX - the
IP1500/2500 does not support two simultaneous IAX accounts.)
Configuration is as follows:
•
Set the VoIP Protocol to IAX.
•
For Description, enter a name the IP1500/2500 will use internally to refer to this account.
•
For Username/Number, enter the number that the IP1500/2500 will use for IAX addressing. This
will often be the extension number in a VoIP-based PBX.
•
For Display Name, enter the display name the IP1500/2500 will send in IAX transactions. This
will often be the calling name of the extension.
•
For Domain, enter the domain the IP1500/2500 will use in its IAX address.
•
For Registrar, enter the address of the IAX server the IP1500/2500 should register and send
outbound calls to. If this is the same as the domain, you can leave this field blank.
•
For Registrar Port, enter an IP port number the IP1500/2500 will register and send outbound
calls to. Typically, this should be left at 0.
•
For Username and Password, set the username and password the IP1500/2500 will use
to authenticate to the domain and outbound proxy. Note that the username is used for
authentication only and need not match the Username/Number field if the VoIP system does not
expect it to.
•
For Registration Lifetime, enter the time in seconds the IP1500/2500 will request that its
registration be valid for. The IP1500/2500 will automatically re-register before this time period
expires.
•
You can adjust the DTMF
Threshhold value if you
have difficulties with the
IP1500/2500 activating in-call
commands when no DTMF is
present.
