Code Alarm CA- 550, Installation Manual, Page: 7 / 30

CA 550
Programming Guide
Feature Bank 0 - 3 Chirps Transmitter Programming
Feature Bank 1 - 4 Chirps RF Programmer Receive Bank
Feature Bank 2 - 5 Chirps Shock Sensor Programming (W/Transmitter Only)
Lite Touch Adjustment Lock increases sensitivity, Unlock decreases sensitivity
Full Trigger Adjustment Lock increases sensitivity, Unlock decreases sensitivity
Feature Bank 3 - 6 Chirps 1 LED Flash 2 LED Flashes 3 LED Flashes 4 LED Flashes
Extended Lock Pulse 1 Second 3.5 Seconds 1 Sec L, Dbl U/L 30 Sec Lk/1 Sec U/L
Ignition Controlled Lock ON OFF
Ignition Controlled Unlock UNLOCK ALL Driver Door Only OFF
Headlights Active w/ARM Active w/DISARM Active w/BOTH OFF
Passive Locks Passive Active
Passive/Active Arming Passive Active
Siren/Horn Siren/Horn Siren Horn
Horn Output Timing 10mS 16mS 30mS 40mS
Custom Code ON OFF
2nd Step Unlock ON OFF
Chirp Delete from TX ON OFF
Trunk Output Timing Push & Hold 20 Sec.
AUX 1 Timing Push & Hold 10 Seconds 20 Seconds Latched
AUX 2 Timing Push & Hold 10 Seconds 20 Seconds Latched
AUX 3 Timing Push & Hold 10 Seconds 20 Seconds Latched
AUX 4 Timing Push & Hold 10 Seconds 20 Seconds Latched
Feature Bank 4 - 7 Chirps 1 LED Flash 2 LED Flashes 3 LED Flashes 4 LED Flashes
RF Start Chirp OFF ON
Run Time 5 Minutes 10 Minutes 15 Minutes 20 Minutes
Running Lights ON Steady Flashing
Tach Mode Tachless Mode Tach Mode
Voltage Level >.5V B4 Start <.5V B4 Start
Crank Average/Crank Time Averaging Preset Time
Crank Time .8 Seconds
1.0 Seconds 1.5 Seconds 2.0 Seconds
Gas/Diesel Gas 10 Sec Delay 15 Sec Delay 20 Sec Delay
Trans Bypass O/P while RS ON During Start Until IGN OFF
Temp Controlled Start OFF ON
Single/Double Pulse Start Single BTN Press Double BTN Press