9
PROGRAMMABLE FEATURES:
Feature
LtsFlash1X
Lts Flash 2X
Lts Flash 3X
Lts Flash 4X
Default
1. Run Time
5 Min.
10 Min.
15 Min.
20 Min.
10 Min.
2. Ign. 2
Off during Crank
On during Crank
On
3. Parking Lights ON
Flash
ON
4. Tach Mode
Tachless
Tach
Tach
5. Voltage Level > 0.5V B4 Start
< 0.5V B4 Start
> 0.5V
6. Diagnostics
Off
On
Off
7. Crank Time
0.8Sec
1.0 Sec
1.5 Sec
2.0 Sec
1.0
8. Gas/Diesel
Gas
Diesel 10
Diesel 15
Diesel 20
Gas
9. BTN Press
1 Press Start
2 Press Start
2 Press Start
10. Unlock Out
Single Pulse
Double Pulse
Single Pulse
To Program Features:
1. Turn the ignition key to the ON position.
2. Press and release the program button 3 times, the parking lights will turn ON.
3. Immediately turn the ignition key OFF, then back to ON. The parking lights will turn OFF.
4. Press and release the program button 2 times, the parking lights will flash once indicating you are in
programmable feature #1.
5. Press the vehicle's brake to change the selection of programmable feature #1 OR use the program button to
advance to the next feature. Each button press advances one feature, the parking lights will flash indicating
the feature number.
6. Programming will exit after 15 seconds of inactivity or if the ignition is turned OFF, the parking lights will give
one long flash to confirm exit.
NOTE: New feature #10, Door Unlock Output while remote start is active. This output is also the factory disarm
output. To unlock, press and hold the transmitter button for 3 seconds while the vehicle is remote started.
NOTE: Once you enter the programming mode, do not allow more that 15 seconds to pass between steps, or
the programming will be terminated.
