4
PURPLE: Starter Output
This wire will have +12 volts when the ignition switch is turned to the start (crank) position only. This wire will
have 0 volts in all other ignition switch positions.
PINK: Ignition 1 Output
Connect this wire to the ignition 1 wire from the ignition switch. This wire will show +12 volts when the ignition
key is turned to the to the ON, RUN and START positions, and will have 0 volts when the key is turned to the OFF
and ACCESSORY positions. For Diesel Applications, this wire must be connected to the ignition circuit that
powers the glow plugs if the vehicle requires glow plug pre-heating. (See programmable features #8)
PINK w/ WHITE: Ignition 2 Output*
Connect this wire to the ignition 2 wire from the ignition switch. This wire will show + 12 volts when the ignition
key is turned to the ON or RUN position and in some cases the START position. This wire will show 0 volts
when the key is turned to the OFF and ACCESSORY positions.
*NOTE: See programmable features #2 for programming this wire to function as an ACCESSORY wire.
ORANGE: Accessory Output
Connect this wire to the Accessory wire from the ignition switch. This wire will show + 12 volts when the ignition
switch is turned to the ACCESSORY, ON and RUN positions, and will show 0 volts when the key is turned to the
OFF and START positions.
ORANGE
PINK
RED
PURPLE
PINK/WHITE
RED
BLUE/BLACK
Active out *
+12 Volts in switch position indicated
May be +12 volts in switch position indicated
This circuit is not always required for installation
