19
7. System Testing
Security Operation
Press LOCK once
1. Doors lock.
2. Courtesy lights (if on) shut off.
3. Unit checks to see if doors, hood or trunk are open. If open, siren
(or horn) sounds once, parking lights flash once, and system
enters pre-arm mode.
If the above conditions are not present:
1. Vehicle starter is disabled.
2. Siren (or horn) sounds twice
*
/ parking lights flash twice.
3. LED (blue light) flashes slowly for duration of arm cycle.
4. After 5 seconds, unit monitors all entrances and sensors.
Press LOCK twice
*
If Silent Choice option is set, siren (or horn) sounds twice on
second press of LOCK button (once if system is in pre-arm mode).
Press LOCK, then press FIND/PANIC within 2 seconds to DISABLE
the IT-s
TM
. Two quick chirps verify this function. Pressing LOCK will
re-enable shock.
Pre-arm mode:
1. The unit will wait for the open door, hood or trunk to be closed.
The LED is solid during pre-arm.
2. If the entrance is secured, the siren/horn will sound again, parking
lights will flash once, and the system will arm.
3. If the entrance is not secured after 4 minutes, the siren/horn will
sound again, parking lights will flash once, the system will arm, and
the defective trigger or entrance will be ignored.
Note:
If entrance is secured after 4 minutes, the system will
immediately begin to monitor the entrance for intrusion.
CA-130 install rev 7-04.pmd
7/28/2004, 3:32 PM
19
