18
6. Personalized Transmitters
A. What is Personalized Transmiiters function Only)
This system has the capability to activate an auxilliary output
when the unit recieves an unlock command from the tranmitter.
This function would be used to activate memory seats or any
other device that you wanted to activate when unlocking the
doors.
To activate personalized transmitters it will be
necessary to change option bank 2 / feature 2 to
the LED on position
Once the option is selected, you MUST re-
program the transmitters.
B. How does it work?
With option selected the last 2 transmitters that are learned into
the sytem will act as transmitter 1 & 2
i.e program 3 tranmitters into system.The 2nd from last
transmitter will activate aux4.The last transmitter learned will
activate aux 3
C. Remote Transmitter Programming - Personalized Transmitters
1. Open the driver’s door.
1.a. The 20/B wire must initially see a ground to access
programming.
2. Turn vehicle ignition on.
3. Press and hold emergency override button.
After 10 seconds, the siren or horn will sound three (3) times. This
indicates that the unit has entered the transmitter programming mode.
4. Program as many transmitters (up to 8) as desired . The last 2
transmitters that are learned will activate the auxilliaries when
unlocked.
CA-130 install rev 7-04.pmd
7/28/2004, 3:32 PM
18
