manualshive.com logo in svg

Codan NGT AR, Getting Started Manual

Share
Download
Codan NGT AR Getting Started Manual Download Page 61

Installation

NGT Transceiver Getting Started Guide

51

Connecting a mobile NGT 

AR Voice

 or 

VR

 station

To connect a mobile NGT 

AR Voice

 or 

VR

 station:

1

Connect the lead from the handset and speaker connector 
to the 10-way plug on the cable lead from the RF unit, 
then secure the locking ring tightly into position.

1

Connect the plug of the handset cable to the 

socket on 

the handset and speaker connector, then secure the 
locking ring tightly into position.

1

Connect the plug at the end of the speaker cable to the 

socket on the handset and speaker connector, then 

secure the cable by pushing it into the slot on the side of 
the connector (see 

Figure 4 on page 46

).

1

Connect the plug at the end of the  cable to the socket at 
the end of the  cable lead from the RF unit, then secure 
the locking ring tightly into position.

1

Connect the plug at the opposite end of the  cable to the 
socket located at the base of the antenna, then secure the 
locking ring tightly into position.

Summary of Contents for NGT AR
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands