EN
G
LI
S
H
9
16
17
18
19
20
21
Disassembling and assembling the blade
Blade holder assembly
16. Blade
17. Drum plate
18. Clamping screw
19. Set plate
20. Set screw
Detaching the dust collector
1. Undo the three clamping screws
(18), hold down the spring-
loaded guard and slide the blade
(16) out of the set plate (19).
You can also choose to slide
the entire blade holder out
of the blade drum (21) and
reverse/change the blade when
the blade holder is loose.
Note:
Do not move the set
screws (20) and pay attention to
how the parts are assembled.
2. If the blade holder is removed
the parts can easily disassemble.
Make sure that all the parts are
in the right place when the blade
holder is put back.
