7
EN
G
LI
SH
17
16
18
10
12
13
1
3
Assembly
The product comes partly assembled.
Warning!
Make sure that the leaf vacuum is switched off and that the power lead is
unplugged before assembling, dismantling or cleaning the product.
Fitting the fan cover
Warning!
Never use the leaf vacuum without the fan cover fitted.
Warning!
Make sure that the leaf vacuum is switched off and that the power lead is unplugged before fitting or
removing the fan cover.
1. Press the back of the fan cover (16) against
the locking lug of the motor housing (17).
2. Lower the fan cover and secure it with
the screw (18).
3. Check that the fan cover seals against
the motor housing and that it is securely fixed.
Fitting the vacuum/blower tube and the leaf sack
Warning!
Never use the leaf vacuum without the vacuum/blower tube and leaf sack.
Warning!
Make sure that the leaf vacuum is switched off and that the power lead is unplugged
before fitting the vacuum/blower tube and leaf sack.
1. Partly withdraw the vacuum/blower tube (1) from
the motor housing (3) until the screw holes are in
line with the holes in the motor housing.
2. Secure the vacuum/blower tube to the motor
housing with the screws. Press the screw
covers (2) over the screws.
3. Fit the leaf sack to the motor housing:
Push the opening of the leaf sack on to
the connection (12) on the motor housing
until the two latches on the leaf sack engage.
Attach the two suspension eyes (13) to
the hooks (10) on the vacuum/blower tube.
4. Attach the shoulder strap to the bracket (5).
Summary of Contents for BVK2400A
Page 2: ......
