After Sales Support
Telephone:
1300 663 907
Internet:
www.winplus.com.au
28
14.
TORCH MODE
The torch function is designed to provide extra illumination when performing small
tasks. When activated, the LEDs on the rear of the phone will be switched on to
provide light.
1. You can access the torch function at any time – even when the phone flip
is closed.
2. Slide the switch on the left side of the phone towards the phone hinge.
3. The LEDs will now be switched on.
4. When you have finished using the light, slide the switch back to the original
position, switching off the LEDs.
Note: If the LEDs are left on for long periods of time, the battery may run flat quickly.
15.
CONNECTING TO A COMPUTER
Charging from a computer
The Cocoon Flip Mobile Phone can be connected to a computer to charge the battery
1. Insert one end of the USB cable into the mobile phone
2. Insert the other end of the USB cable into the computer
3. Select
“Charging”
from the menu displayed on the mobile phone screen
Using your phone as a storage device
The Cocoon Flip Mobile Phone can be connected to a computer to access the photos,
videos and music files on the micro SD card or the internal memory.
1. Insert one end of the USB cable into the mobile phone
2. Insert the other end of the USB cable into the computer
3. Select
“U Disk”
from the menu displayed on the mobile phone screen
4. Your computer will now see the phone as a removable storage device. If you have
a micro SD card inserted, then the phone will appear as two removable devices –
one for internal memory, and one for SD card.
5. Drag and drop your videos, photos, and music files using your computer’s default
file browser
6. When you are finished organising files, you must eject the disks before
disconnecting
a. Windows: select “safely remove hardware” from the bottom-right corner of
the screen
b. Mac: drag the removable disk to the trash
7. You may now unplug the phone safely
Instructions
