After Sales Support
Telephone:
1300 663 907
Internet:
www.winplus.com.au
10
4. Insert the Micro SD card into position, with the copper
contacts face down.
5. Lower the metal cover of the Micro SD card slot and
slide to the lock position, as marked.
3.
INSTALLING THE BATTERY
Before installing the battery you should first insert your SIM card and Micro SD card
(if required) as described in the previous steps.
To insert the battery:
1. Slide the rear cover of the phone away from the flip hinge
to remove the cover.
2. Insert the battery, connecting the copper contacts first and then
pressing the top of the battery into place.
3.
Replace the battery cover, sliding it up until you hear a soft click.
4.
CHARGING THE BATTERY
Before you use the phone for the first time, charge the battery for a minimum
of 8 hours.
To charge the battery:
1. Connect the USB cable to the bottom of the phone.
2. Connect the other end of the USB cable to the wall charger.
3. Plug the wall charger into power outlet and switch on.
Instructions
