background image

7

6

After Sales Support

After Sales Support

1300 663 907

1300 663 907

Model Number 

 

HE170351

Model Number 

 

HE170351

[email protected]

[email protected]

Product Features

Parts List

Technical Specifications

Installation Tips

•  Receives HD and digital TV signals, local VHF and UHF signals
•  Reflector Panels provide excellent resistance to interference
•  F-type connection makes signal transmission more effective
•  Mount to fascia boards, rooftops, walls and chimneys
•  J Pole with mounting bracket included
•  Durable elements are rustproof and water resistant
•  Suitable for almost all metro and rural installations in Australia

•  1 x Outdoor Antenna
•  1 x 12m F-Type Antenna Cable 
•  1 x J Pole with mounting bracket and 2 bolts
•  1 x Mounting accessories

•  1 x Instruction Manual
•  1 x Warranty Card

•  Frequency: VHF (174-230MHZ), UHF (470-860MHZ)
•  Gain: VHF: Up to 0dBi, UHF: Up to 5.5dBi
•  Polarization: Horizontal
•  Impedance: 75Ω
•  Connector: F-connector
•  Cable: 12m coaxial cable 3C–2V 75Ω
•  J-Pole dimensions: 472 x 144.08mm

1. 

When installing, take note of the direction of your nearby antennas. You can get a good idea of 
the best direction to face your antenna by looking at those around you.

2. 

If you are replacing an already mounted antenna, take note of the height and direction of the 
old antenna to get a good idea of where to start.

3. 

Before permanently installing your antenna, you should always check the quality of the 
reception on your TV.

4. 

The mounting pole will give you an additional ~400mm of height when mounted on the 
bracket. You should note the height of your other antennas nearby to ensure that the ~400mm 
height allowed by the Cocoon Outdoor Antenna Kit is sufficient.

5. 

The Cocoon Outdoor Antenna Kit comes with a 12m coaxial cable with an F-Type connector. 
This is a standard antenna cable. If you require additional cable length, you should contact 
your local electrical supplier.

6. 

The behaviour of your antenna can be affected by nearby large metallic objects, such as air 
conditioning units. Identify these objects in your installation situation and install the antenna 
away from these objects.

7. 

If you live in a very low lying area or if there is a large obstruction between your installation 
point and the broadcast location, you may receive little or no signal at all.

Summary of Contents for HE170351










Reviews: