Cochran COMMANDER, Owner'S Manual

Page: 18 / 44

1 6
Refer to the Analyst
®
for information about how to
modify parameters. During the PreDive Prediction
Mode, the unit will compute and display the maximum
safe time and the calculated PO
2
value at that depth.
TOUCH PROGRAMMING INFORMATION DISPLAY:
The Information display is accessed via the
Programming Mode. The information presented will
appear as in Figure 24. The information in the upper
right of the screen indicates the unit is in the Air Only
FO2 Mode.
Identifier Description
F0 Air only
The Battery voltage is displayed in the lower center of
the screen as a two-digit number with a decimal point
proceeded by a lower case ‘b’. Figure 24 shows what
the display screen looks like for a Commander
configured for Air Only.
TOUCH PROGRAMMING - DEPTH ALARM: The
Depth Alarm allows the diver to select a maximum
depth below which the
diver does not wish to descend
before an alarm is issued. This depth can be set from
0 to 320 feet in one foot increments.