NOTE
: 1. Refer to the owner’s manual of your TV as well.
2. Before connecting the DVD player to a TV set, be sure to turn the power off and
unplug both units from the wall outlet.
Be sure that your unit is at low volume level before connecting the headphone.
Increase the volume gradually for your comfortable listening.
CAUTION:
Hearing experts advise against the constant use of personal stereos played at high
volume. Constant high volume use can lead to hearing loss. If you experience ringing
in the ears or hearing loss, discontinue use and seek medical advise.
Power is supplied through the pro-
vided appropriative power adapter, one end of which is connected to the DC IN jack on the
main unit, another to wall outlet with AC100-240V.
Note:
a. If you have difficulty inserting the plug, turn it over and reinsert it.
b. If the unit will not be in use for long periods of time, disconnect the plug from the outlet.
c. In order to prolong the operation life, the intervals of continuous power on should be not
less than 30s.
Connections
Connections
5
6
Connecting to TV
Connecting to an amplifier equipped with a Dolby Pro Logic Surround
with a receiver equipped with Dolby Digital
Connect the equipment. Refer to the receiver’s owner’s
Connecting to a Headphone
Power Connections(to AC Adapter
AC adapter
This AC adaptor operates on
100-240V~~50/60Hz 2A
DC OUT:9V
DC current: 2.0A Min
TV or moniter with audio/video input
To Audio/video input
Audio/Video cable(Supplied)
To audio/optical output
To videl output
Amplifier equipped with a
Dolby Pre-Logic surround
To optical input
Optical cable not supplied
To Audio/Optical out
To headphone jack
Headphone
Summary of Contents for TF-DVD500 - DVD Player - 3.5
Page 12: ......
