![background image](http://html1.mh-extra.com/html/cobra/microtalk-mt-725/microtalk-mt-725_owners-manual_2631193012.webp)
MODE FUNCTIONS
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that
channel/privacy code. Your radio will remain on that channel/privacy
code and return to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning
CTCSS privacy codes.
If you press the TALK button while scanning and not within ten (10) seconds
of receiving a transmission, you will transmit on the channel/privacy code on
which you last received a transmission. This will return the radio to LISTENING
MODE.
If you do not press any button within ten (10) seconds, your radio will
automatically resume scanning CTCSS privacy codes.
During Scanning (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either the channel
or channel/privacy code that was displayed before you entered Mode
Functions or channel/privacy code on which, during scanning, you last
received a transmission. This will return the radio to LISTENING MODE.
b. Press the MODE button to proceed to next available Mode Function.
English
c. Press the LOCK button to return to LISTENING MODE on either the
channel or channel/privacy code that was displayed before you entered
Mode Functions or the channel/privacy code on which, during scanning,
you last received a transmission.
VibrAlert
®
and Call Alert
Your microTALK
®
radio can alert you to incoming signals by sounding an
audible call tone, by vibrating silently, or both.
To Change Call Settings:
1. Press the MODE button until the
Call Setting icon flashes on the
display. The current setting (“01”
– V Ring, “02” – Vibrate
Only, or “00” – Ring Only) is
displayed.
2. Press the CHANNEL UP or
CHANNEL DOWN button to change
the call setting.
VibrAlert
®
Icon
VibrAlert
®
&
Call Alert Icon
Call Alert Icon
Mode Button
Channel Buttons