background image

OPERATION

To Recharge the Rechargeable NiMH Battery Pack In Radio:

1. Attach the POWER SUPPLY to the

charger base and plug it into an
electrical socket.

2. Place the rechargeable NiMH

BATTERY PACK (part No. FA-BP) in
the battery compartment (see “Battery Installation”).

3. Place the RADIO in the charger base. 
The CHARGE light on the charger base will indicate when
the radio is inserted into the charger properly.
A full charge will take approximately three (3) hours. You
can leave the unit in the charger indefinitely. 
It is recommended that your radio should be turned off while being charged.

WARNING: Only the NiMH battery pack FA-BP can be recharged.

To Recharge the Rechargeable NiMH Battery Pack:

1. Attach the POWER SUPPLY to the

charger base and plug it into an
electrical socket.

2. Insert BATTERY PACK GUIDE in the

radio charging well.

English

3. Place the rechargeable NiMH BATTERY PACK (part No.

FA-BP) in the charger base with metal contacts facing
rear of charger stand.

The CHARGE light on the charger base will indicate when
the rechargeable NiMH battery pack (part No. FA-BP) is inserted into the
charger properly.
A full charge will take approximately three (3) hours. You can leave the the
battery pack in the charger indefinitely. 

WARNING: Only the NiMH battery pack FA-BP can be recharged.

Optional Battery Charging

When the NiMH battery pack (part No. FA-BP) is used,
the battery pack can be charged using the optional rapid
wall mount charger (part No. PA-CW). Simply place the
battery pack in the battery compartment, open the
CHARGE/INTERCOM tab on the side of the unit and insert
the plug into the charge jack to start charging. The
batteries should be fully charged in about three (3)
hours.

WARNING: Only the NiMH battery pack FA-BP can be

recharged.

NOTE: See “Optional Accessories” for accessory

availability and ordering instructions.

Charging Batteries

Charge/Intercom
Tab

Battery Pack 
In Radio

Charging Battery
Packs In Radios

Insert Battery Pack
Guide(s)

Charging Battery
Packs Only

Attach Power Supply

Attach Power Supply

Summary of Contents for microTALK MT 725



















Reviews: