![background image](http://html1.mh-extra.com/html/cobra/microtalk-frs307/microtalk-frs307_operating-instructions-manual_2631170002.webp)
O P E R AT I O N
ENGLISH
Product Features
• TWO-WAY RADIO with up to a
2 mile (3 km) range
• 14 CHANNELS
• 38 CTCSS PRIVACY CODES
• UHF FM frequencies
• BACKLIT LCD display
• EXTERNAL SPEAKER/MICROPHONE jack
• 10 MEMORY LOCATIONS
• FULL CHANNEL/CTCSS SCAN
• MEMORY SCAN
• DUAL WATCH
• MAXIMUM RANGE extender
• 5 CALL SIGNAL SELECTIONS
• VOX MODE for hands-free transmissions
• selectable "ROGER BEEP" confirmation tone
• selectable KEYSTROKE TONES
• AUTO SQUELCH
• CALL ALERT
• BATTERY SAVER circuitry
• LOCK button
• BELT CLIP
• WRIST STRAP
• WATER RESISTANT
Installing or
Replacing Batteries
1.
Pull down the LOCK tab to remove the
battery compartment cover.
2.
Insert four AAA batteries. (Always use high
quality alkaline batteries.) Position
batteries according to polarity markings.
(
NOTE
: See page 16 for information
about optional battery pack and desktop
charger accessories.)
2
P R O D U C T F E AT U R E S
ENGLISH
1
This device complies with part 15 of the FCC rules.
Operation is subject to the condition that this device does
not cause harmful interference.
FCC Warnings
:
Replacement or substitution of
transistors, regular diodes or other parts of a unique
nature, with parts other than those recommended by
Cobra
®
, may cause a violation of the technical regulations
of part 95 of the FCC Rules, or violation of Type
Acceptance requirements of Part 2 of the Rules.
ON-OFF/
POWER
button
backlit LCD display
LOCK button
MODE button
VOLUME UP
& DOWN
buttons
CHANNEL
SELECT
buttons
speaker/
microphone
belt clip
CALL
button
TALK
button
LIGHT/MAX
RANGE
button
Antenna
battery
compartment
battery
charger
pads
LOCK tab
external speaker/
microphone jack
LIGHT/MAX
RANGE button
TALK
button
INDUSTRY CANADA NOTICE:
Operation is subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation
of the device.
«IC» before the equipment certification number signifies
that the Industry Canada technical specifications were
met. It does not guarantee that the certified product will
operate to the user’s satisfaction.
Lock tab